Bobcat Loaders Engine Starter Motor 6667987 Fit MT50 MT52 MT55 MT85 S70 751

Engine Starter Motor 6667987 For Bobcat Loaders MT50 MT52 MT55 MT85 S70 751
 

 
 
Application:
 
Skid Steer Loaders: 453, 463, 553, 653, 751, S70
Mini Track Loaders: MT50, MT52, MT55, MT85
 
The Engine Starter Motor 6667987 is a critical component in Bobcat Loaders MT50, MT52, MT55, MT85, S70, and 751. It allows the loader's engine to start smoothly and efficiently. To operate the Engine Starter Motor, follow the steps below:

1. Preparation:

   • Ensure that the loader's battery is fully charged and properly connected.
   • Verify that all safety precautions, such as engaging the parking brake and ensuring no obstructions are around the loader, are taken.

2. Locate the Starter Motor:

   • The Engine Starter Motor can typically be found near the engine's flywheel or transmission housing.

3. Ignition Switch:

   • Insert the loader's key into the ignition switch.

4. Turn on the Power:

   • Turn the ignition switch to the "ON" position. This will provide power to the starter circuit.

5. Engage the Starter:

   • Depress the loader's clutch pedal fully (for manual transmission) or ensure the loader is in "Neutral" (for automatic transmission).
   • Press the loader's starter button or turn the key to the "START" position.
   • The Engine Starter Motor will engage, and the engine should start.

6. Release the Starter:

   • As soon as the engine starts, release the starter button or key back to the "ON" position.
   • The Engine Starter Motor will automatically disengage from the flywheel.

7. Monitor Engine Start:

   • Observe the loader's engine to ensure it starts smoothly without any unusual noises or vibrations.

8. Shutdown:

   • If the engine fails to start after a few attempts, wait for a brief moment before trying again. Avoid excessive cranking, as it may lead to starter motor damage.
   • Once the engine starts, allow it to warm up before engaging in any heavy-duty operations.

9. Post-Operation:

   • After using the loader, turn off the engine and remove the key from the ignition switch.
   • If the loader will not be used for an extended period, disconnect the battery to avoid drainage.

Note: It is essential to follow the manufacturer's guidelines and the loader's specific manual for the correct operation of the Engine Starter Motor. If you encounter any issues during the starting process or suspect any abnormalities, consult a certified Bobcat service technician for assistance.

 
Quality Factories Show

Construction Machinery Exhibition

 
Payment and Delivery